Is clk 50 and clk 125 required?

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: Is clk 50 and clk 125 required?

Re: Is clk 50 and clk 125 required?

Post by support » Tue Jun 02, 2020 5:17 am

Hello,

If the board doesn't supply the 50 MHz and 125 MHz clocks, they can be generated from another free-running clock by virtue of a PLL. This is discussed in the IP Compiler for PCI Express User Guide, page 166:

https://www.intel.com/content/dam/www/p ... xpress.pdf

To make a long story short, the 125 MHz frequency is mentioned explicitly in the user guide, and it must be free-running and independent of the PCIe reference clock. However it can be derived from another free-running clock, and same goes for the 50 MHz clock.

There's a caveat, though: The PLL lock. The said user guide discusses this and explains how to deal with this issue.

Regards,
Eli

Is clk 50 and clk 125 required?

Post by Guest » Tue Jun 02, 2020 12:05 am

Hi,

I have a Cyclone IV GX development board which has no transceivers, so I'm wondering if the clk 50 and clk 125 are still needed?

Thanks.

Top

cron