by support »
Hello,
The SD card appears in Xillinux as /dev/mmcblk0, with the two partitions as /dev/mmcblk0p1 and /dev/mmcblk0p2. The latter is referred to as /dev/root in the mount table, and mounted as /. /dev/mmcblk0p1 is the small FAT partition of the SD card. You can mount it, for example, by creating a directory called /mnt/card:
mkdir /mnt/card
and then mount it with
mount /dev/mmcblk0p1 /mnt/card/
And then access the files under /mnt/card
Regards,
Eli
Hello,
The SD card appears in Xillinux as /dev/mmcblk0, with the two partitions as /dev/mmcblk0p1 and /dev/mmcblk0p2. The latter is referred to as /dev/root in the mount table, and mounted as /. /dev/mmcblk0p1 is the small FAT partition of the SD card. You can mount it, for example, by creating a directory called /mnt/card:
mkdir /mnt/card
and then mount it with
mount /dev/mmcblk0p1 /mnt/card/
And then access the files under /mnt/card
Regards,
Eli