Streaming mode

Comments and questions to the author of the "Down to the TLP" posts (Eli Billauer)

Streaming mode

Postby Guest » Mon Mar 12, 2018 5:28 pm

Our application requires ability to continuously stream data from a KCU105 board that has an A/D converter attached via an FMC connector. Does your solution work when the fpga is set up for streaming mode?

Thank you,
Craig Thomas
Guest
 

Re: Streaming mode

Postby support » Mon Mar 12, 2018 7:10 pm

Hello,

It's not clear what you mean with "streaming mode".

Anyhow, Xillybus is well suited for data acquisition applications. In essence, all you have to do is to write the data from the A/D converters into a plain FPGA FIFO, and connect the FIFO's other side to Xillybus' IP core.

And then, on the host side, you can use plain UNIX' "cat" or "dd" to copy the acquired data into a file (assuming that the disk is fast enough).

Regards,
Eli
support
 
Posts: 582
Joined: Tue Apr 24, 2012 3:46 pm


Return to General PCIe

cron