Simulation of PCIE commuication

Comments and questions related to the "Down to the TLP" pages

Simulation of PCIE commuication

Postby lucadimauro »

Hello,
I'm trying to perform some tests regarding simulation of the communication between an FPGA and an host PC over a PCIE bus. To simulate the FPGA I use ModelSim-Altera and Quartus II Lite Edition.
I downloaded the Xillybus demo an synthetized succesfully, but I still don't see any
Code: Select all
/dev/xillybus_something
device file.

I do these tests with the university, so I cannot buy yet an FPGA and my PC doesn't have a PCIE port natively.
I use Ubuntu 20.04 as host OS.

Is it reasonable to do such test? Can you provide me some tips?
lucadimauro
 
Posts: 2
Joined:

Re: Simulation of PCIE commuication

Postby support »

Hello,

The /dev/xillybus_* files appear only when you have an FPGA loaded with the relevant bitstream file, and it's connected to the PC. Plus the driver should be installed, but it usually is. As you don't have any FPGA, there's no reason you should see those files.

As for simulation practices with Xillybus, please refer to section 5 of the "Xillybus FPGA designer’s guide":

http://xillybus.com/downloads/doc/xillybus_fpga_api.pdf

Regards,
Eli
support
 
Posts: 802
Joined:

Re: Simulation of PCIE commuication

Postby lucadimauro »

Thank you Eli for your reply. It is very useful.
I haven't checked that guide because I'm still learning the functionalities of Xillybus.

I'll read the API giude.

Best,
Luca
lucadimauro
 
Posts: 2
Joined:


Return to General PCIe