Problem with Raspberry Pi 5 and Xillybus driver

Questions and discussions about the Xillybus IP core and drivers

Problem with Raspberry Pi 5 and Xillybus driver

Postby Guest »

Hello,

I have a problem with Xillybus on a Raspberry Pi 5 with Linux kernel 6.1.0. When insmod'ing the driver, I get a kernel oops from swiotlb_map.

The message of this oops is:

xillybus_pcie 0000:01:00.0: swiotlb addr 0x00000010fdffc000+16384 overflow (mask ffffffff, bus limit 1fffffffff).

Then there is a log message saying "xillybus_pcie 0000:01:00.0: Failed to map DMA memory!. Aborting."

There are no device files. Please help!
Guest
 

Re: Problem with Raspberry Pi 5 and Xillybus driver

Postby support »

Hello,

There is something inherently wrong with the kernel's memory allocation and/or DMA handling. There is no reason for the SWIOTLB mechanism to get involved.

It's possible to work around this problem by forcing the driver to work with 64-bit DMA: Edit this part in xillybus_pcie.c:

Code: Select all
    if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
        endpoint->dma_using_dac = 0;
    else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
         endpoint->dma_using_dac = 1;
     else {
         dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n");
 
     [ ... ]


And change it to:

Code: Select all
    if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
         endpoint->dma_using_dac = 1;
     else {
         dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n");

        [ ... ]


It's clear from the oops message that 32-bit DMA was in effect. The kernel should probably have refused to this, and let the driver fall back to 64 bits. With this change, 32-bit DMA isn't an option, so this solves the problem with DMA mask. This way, the kernel will have no excuse to mess around with SWIOTLB.

I also suggest changing the memory allocation routine, so it doesn't limit the DMA buffers to 32 bits, as it currently does. Edit xillybus_core.c, and get rid of the __GFP_DMA32 flag.

In other words, change from this:

Code: Select all
    addr =  __get_free_pages(GFP_KERNEL | __GFP_DMA32 | __GFP_ZERO, order);


To this:

Code: Select all
    addr =  __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);


This probably won't matter, because the kernel appears to have ignored the flag either way.

It's best to use IP cores that have been generated after July 2021 (and demo bundles downloaded after this date) along with 64-bit DMA. These IP cores are handling 64-bit DMA better than those previously released.

For general information about SWIOTLB, see this page:

https://xillybus.com/tutorials/iommu-swiotlb-linux

Regards,
Eli
support
 
Posts: 802
Joined:


Return to Xillybus

cron