GPIO LED

Questions and discussions about the Xillybus IP core and drivers

GPIO LED

Postby nagchil »

Hello,
In Xillybus design what will GPIO[3:0] will indicate........??
As it is connected to LEDs ..
GPIO_LED[0] == DS12 will be blinking alwz
GPIO_LED[3] == DS10 will be always on..

Is there any indication of this.....??
nagchil
 
Posts: 9
Joined:

Re: GPIO LED

Postby support »

Hello,

GPIO_LED[0] is a "heartbeat" LED, and is blinking as long Xillybus' IP core gets a clock (on some systems it won't blink if the core is held in reset).
GPIO_LED[3] reflects a certain internal state, but if it's always on, it probably indicates that the core is held reset. The plausible cause for this is that something is wrong with the PCIe link at the low level.

Regards,
Eli
support
 
Posts: 802
Joined:

Re: GPIO LED

Postby Guest »

GPIO_LED[2] or GPIO_LED[3] ???
as i know GPIO_LED[3] indicates core reset?
Guest
 

Re: GPIO LED

Postby support »

Thanks. My mistake. For the record, it said GPIO_LED[2] before, and I just edited the post and fixed it.

Eli
support
 
Posts: 802
Joined:


Return to Xillybus

cron