Do you have any clue on what might be causing this? I'm currently connecting the EOC signal of the XADC to the DEN of the XADC to output values and the CHANNEL signal to the DADDR ("00" & CHANNEL, since CHANNEL is only 5 bits and DADDR is 7 bits wide) as proposed in the XADC doc.
This is what I added to the xillydem.xdc:
- Code: Select all
# XADC
set_property -dict "PACKAGE_PIN L11 IOSTANDARD LVCMOS33" [get_ports "vp_in"];
set_property -dict "PACKAGE_PIN M12 IOSTANDARD LVCMOS33" [get_ports "vn_in"];
set_property -dict "PACKAGE_PIN E16 IOSTANDARD LVCMOS33" [get_ports "vauxn0"]; # "XADC-AD0N-R"
set_property -dict "PACKAGE_PIN F16 IOSTANDARD LVCMOS33" [get_ports "vauxp0"]; # "XADC-AD0P-R"
set_property -dict "PACKAGE_PIN D17 IOSTANDARD LVCMOS33" [get_ports "vauxn8"]; # "XADC-AD8N-R"
set_property -dict "PACKAGE_PIN D16 IOSTANDARD LVCMOS33" [get_ports "vauxp8"]; # "XADC-AD8P-R"
Do you have any clue on what might be causing this? thanks!