Booting Xillinux with <some_name>.bit, not xillydemo.bit

Questions and discussions about Xillinux

Booting Xillinux with <some_name>.bit, not xillydemo.bit

Postby Guest »

Hello,

what changes one should do and where(device tree, boot.bin etc.) in order to boot Xillinux with a .bit file that has different name than xillydemo.bit?

Regards,
John
Guest
 

Re: Booting Xillinux with <some_name>.bit, not xillydemo.bit

Postby support »

Hello,

The bitfile is loaded by U-boot. In principle, an environment variable needs to be modified to make it load a file with a different name. You may override the default setting and save it to the QSPI flash. This is briefly discussed in section 4.3.3 of the Getting started with Xillinux guide:

http://xillybus.com/downloads/doc/xilly ... d_zynq.pdf

Regards,
Eli
support
 
Posts: 802
Joined:


Return to Xillinux (Linux distribution for Zynq-7000)

cron