how to rebulit uboot?

Questions and discussions about Xillinux

how to rebulit uboot?

Postby andylgh » Sun May 17, 2020 1:57 pm

question:
I get the uboot code from : https://github.com/xillybus/xillinux-u-boot.
I read the uboot-patches/readme,there are five patch files:
0001-fpga-zynqpl-Fixed-bug-in-alignment-routine.patch
0001-zynq_common.h-Configuration-for-Xillinux.patch
0002-zynq_common.h-Configuration-for-Xillinux.patch
0002-zynq_common.h-One-second-delay-instead-of-3.patch
0003-zynq_common.h-One-second-delay-instead-of-3.patch
need i patch five files first,then to make uboot?
andylgh
 
Posts: 22
Joined: Mon May 11, 2020 11:45 am

Re: how to rebulit uboot?

Postby support » Sun May 17, 2020 2:12 pm

Hello,

The xillinux branch of the git repository you pointed at contains the sources that were used to compile the U-boot utility that goes with Xillinux-2.0. You should therefore clone it into your hard disk and checkout out that branch, and build U-boot as usual. You may want to refer to this page:

http://xillybus.com/tutorials/uboot-hacking-howto-1

There is no need to apply any patches -- they are already included in the said branch.

Regards,
Eli
support
 
Posts: 718
Joined: Tue Apr 24, 2012 3:46 pm


Return to Xillinux (Linux distribution for Zynq-7000)

cron