1.3 demo bundle with xilinux-eval-zybo-2.0c bit file

Questions and discussions about Xillinux

1.3 demo bundle with xilinux-eval-zybo-2.0c bit file

Postby Guest »

Hi, dear sir,

I use 1.3 xillybus demo bundle and xillybus-lite goes well. Now I downloaded the xilinux-eval-zybo-2.0c but only re-generated the FPGA .bit file and then replaced with legacy bitfile. However, after some test, it seems to have issues in register read/write in xillybus-lite against 2.0a bitstream file.

Can the 1.3 demo bundle work with 2.0c FPGA bit stream file ? Thanks
Guest
 

Re: 1.3 demo bundle with xilinux-eval-zybo-2.0c bit file

Postby support »

Hello,

It's a bit unclear what you've done there exactly, but I guess the important piece of info is that the difference between xilinux-eval-zybo-2.0c and xilinux-eval-zybo-2.0a is just the DTB files, and some minor changes that have no influence on the bitfile.

So unless you've changed the DTB (which you should if you want it to work with Xillinux-2.0), there's no reason for any difference. And even if you have, it should still work.

Regards,
Eli
support
 
Posts: 802
Joined:


Return to Xillinux (Linux distribution for Zynq-7000)

cron