Support for the new Zybo Z7 boards

Questions and discussions about Xillinux

Support for the new Zybo Z7 boards

Postby DaleTron »

Hello,

Just wondering if anyone has already rebuilt the FSBL to allow the new Zybo Z7-10 and Z7-20 boot Xillinux?
Seeing as the original Zybo has now been discontinued then I am sure I will not be the only person to ask this.
Not being able to build it on Vivado, plus XPS not running on windows 10 are turning the process into quite a faff...

From what I can tell I should (at a bare minimum) just have to alter the CPU and DDR clock speed.
The example Zybo image boots (according to LED's on the board) but the UART output is some odd baud rate due to (I'm assuming) the clock definitions not being correct.
Summary of differences here:
https://reference.digilentinc.com/refer ... tion-guide

Thanks,

Dale
DaleTron
 
Posts: 1
Joined:

Return to Xillinux (Linux distribution for Zynq-7000)

cron