Hello,
I'm trying to build Xillinux with Xillybus demo logic using this manual:
http://xillybus.com/downloads/doc/xilly ... d_zynq.pdf
It all goes well until I hook up a monitor to the Zedboard. Zedboard boots up, routes the programmable logic and just indefinitely shows moving white Xillybus screensaver on a VGA output. According to the manual it means that "The Xillybus logo screensaver with a white background is present on the screen from the moment the logic fabric is loaded until the Linux kernel launches. It will also show when the operating system puts the driver in “blank” mode, which is a normal condition when the system is idle, or when the X-Windows system attempts to manipulate the graphic mode."
When hooked on a UART, it shows on a host computer that Xillinux boots up normally and is ready to use. I made a backup of the last working image which, when restored, also shows white Xillybus screensaver. I've been using both USB Image Tool and Win32 Disk Imager, which are recommended tools for burning Xillinux image on an SD card in a 3.6.2 chapter of a previously linked manual. I tried to format SD card to FAT filesystem and FAT32 filesystem and both give same result.
I'm baffled by this... Any suggestion how to solve this would be very helpful.