Timing failure on K7 160T

Questions and discussions about the Xillybus IP core and drivers

Timing failure on K7 160T

Postby Guest »

Eli,

Would you be so very kind as to look at this timing failure problem? Since the signal in question is actually in a Xillybus-delivered file, I wonder if it might not actually be a Xilinx PCIe v3.3 problem.

https://forums.xilinx.com/t5/Implementa ... d-p/884725

Thanks very much,
Helmut
Guest
 

Re: Timing failure on K7 160T

Postby Guest »

Eli,

First, please excuse me for my poor wording. The file in question is indeed a Xilinx (C) file. It's just that I first got it by downloading your example. It doesn't mean you're responsible, but it does mean you might be knowledgeable.

In fact, I just found http://billauer.co.il/blog/2017/02/pipe ... ie-xilinx/ where you dance around in this file in detail. Unfortunately, you don't address my specific issue. You *do*, however, make me think that this pclk_sel signal indeed is fairly static with respect to the clocks, and that I should be able to ignore this timing failure. Again, I would have thought that the verilog (* *) flags or the constraints would cause the tool to ignore the timing failure, but it hasn't. I'm just nervous about marking it for ignore myself! I'm hopeful that my need to move the 4x lanes to a different GTX pulled a constraint out from applicability. I can't find evidence of that in the critical and regular warnings however.

Thanks,
-Helmut
Guest
 

Re: Timing failure on K7 160T

Postby support »

Hello,

I've answered in Xilinx' forum.

Eli
support
 
Posts: 802
Joined:

Re: Timing failure on K7 160T

Postby Guest »

Thanks again, Eli.
-Helmut
Guest
 


Return to Xillybus

cron