The Xillybus Forum

[quote="Guest"]Thanks for great simplified explanation,

I have two question. For example if Root Complex is directly connected to endpoint, At the time of initialization, InitFC packets exchanged by both parties (RC & Endpoint), If we look at initFC packets, does that contains maximum value of credits available? and other question is after initialization, update-FC packet can contain higher values of credits compared to what was seen on InitFC(initialized Flow control credits) packets?

Are you also looking for finance broker south coast, if you are, then you can visit their website [url=https://parringtonfinance.com.au/]on here[/url].
[/quote]

To answer your first question, yes, the InitFC packets exchanged during initialization do contain the maximum value of credits available. This value is typically determined by the Root Complex and communicated to the endpoint during initialization.

As for your second question, it is possible for the update-FC packets to contain higher values of credits compared to what was seen on the InitFC packets. This can happen if the endpoint has additional credits to offer, or if the Root Complex has increased the maximum value of credits available. The update-FC packets are used to dynamically adjust the flow control credits during operation, based on the actual traffic conditions and available resources.

Hello,

Credits is just a way to announce to the other side how much it may transmit. It usually reflects the amount of storage available on the receiver's side, so it makes sense that the initial credits will be represent the highest allowed breathing space ever seen on the link.

As for the actual numbers in the credit packets -- yes, they will increase. The credits don't state the amount of data allowed for transmission at a given point ("how much memory is left"), but what the total amount, from the initialization, is allowed to reach (subject to a modulo). So update packets will have higher numbers than the initial ones, as data goes through the link and is cleared from the receiver's internal buffers.

In essence, there is no difference between initial credits and update packets. They both tell the transmitter that the total number of elements, modulo-something, is now allowed to reach the number X.

Regards,
Eli

Thanks for great simplified explanation,

I have two question. For example if Root Complex is directly connected to endpoint, At the time of initialization, InitFC packets exchanged by both parties (RC & Endpoint), If we look at initFC packets, does that contains maximum value of credits available? and other question is after initialization, update-FC packet can contain higher values of credits compared to what was seen on InitFC(initialized Flow control credits) packets?