Trouble detecting FPGA
Posted:
Hi,
Apologies in advance if this is a trivial problem and something I might have overlooked.
I am trying to get the Xillybus demo working for the KCU105 board. I have built and programmed the FPGA with the bitfile (vivado 2018.2.1) and have installed the xillybus driver on a Linux kernel 3.10.0 (Centos7).
After programming the FPGA and then turning on the computer, I am unable to locate the PCIe device (using lspci). It shows an unassigned class [ff00]: Xilinx Corporation Device ebeb.
Typing lsmod shows xillybus_pcie and xillybus_core. xillybus_core is shown to be used by xillybus_pcie but xillybus_pcie is not being used.
Grepping /var/log/messages for xillybus returns "can't disable ASPM; OS doesn't have ASPM control" and "Created 5 device files"
Thanks,
Victor.G
Apologies in advance if this is a trivial problem and something I might have overlooked.
I am trying to get the Xillybus demo working for the KCU105 board. I have built and programmed the FPGA with the bitfile (vivado 2018.2.1) and have installed the xillybus driver on a Linux kernel 3.10.0 (Centos7).
After programming the FPGA and then turning on the computer, I am unable to locate the PCIe device (using lspci). It shows an unassigned class [ff00]: Xilinx Corporation Device ebeb.
Typing lsmod shows xillybus_pcie and xillybus_core. xillybus_core is shown to be used by xillybus_pcie but xillybus_pcie is not being used.
Grepping /var/log/messages for xillybus returns "can't disable ASPM; OS doesn't have ASPM control" and "Created 5 device files"
Thanks,
Victor.G